Product Data Sheet    

ATP600CRP


Adaptive Technology Passive Infrared Ceiling Sensor
Hubbell ATP series ceiling sensors detect occupancy based on a passive infrared signal. They are available with a wide view lens (ATP1500C series) for large areas with multiple occupants and a high density lens (ATP600C series) for areas with a single occupant where small motion detection is desired. Each sensor includes an infrared masking kit which can be used to reduce the coverage area. Models with “RP” suffix include an isolated relay and photocell. A CU series control unit is required for use with ATP series ceiling sensors.

Hubbell Wiring Device-Kellems Product Specifications
 Product  Indoor Sensor
 Application  Ceiling
 Sensing Technology  Passive Infrared
 Coverage Area  600 Sq. Ft.
 Adaptive  Yes
 Color  
 Photocell & Isolated Relay  Yes
 Agency Approvals  UL listed
 Power Requirements  24V DC Nominal, 33mA from Hubbell CU Series Control Unit
 Isolated Relay  Normally open and normally closed terminals available
 Lens Material  Polyethylene
 Dimensions  4.5" diameter, 1.5" height
 Housing Material  Flame retardant UL 94 V-0 ABS
 Operating Temperature  32° F to 104° F (0° C to 40° C) with rate of change not exceeding 20° F (11° C) per hour
 Operating Humidity  0% to 95% noncondensing relative humidity
 Storage Temperature  -20° F to 150° F (-29° C to 65° C)
 Storage Humidity  0% to 95% noncondensing relative humidity
 Time Delay  Test (8 seconds), Adaptive 8 to 40 minutes
 Ambient Light  1 to 1,000 foot candles
 Sensitivity  Adaptive 0 to 100%
 Passive Infrared Sensing Indicator  Red LED
 Mounting Height  8 to 12 ft.










 

Hubbell Wiring Device-Kellems